Log In
November 19, 2013
Offline
I sprayed a few fish with wet look gloss. After about 2 weeks in the showroom, I looked and saw the gloss flaking off. Never had this to happen before. Could I have not put enough hardener in the mix or could it be something else. I appreciate and I’m open for any advise . Thanks
September 26, 2011
Offline
Could be a number of things. What paint are you using ?
It could be the hardener was not mixed in the right ratio.
Could be it was not applied correctly. Did you give light tack coats to start ?
Could be a chemical reaction between the paint you are using and the gloss.
Could possibly be a faulty batch.
Taxidermy Talk Administrator
Stehling’s Taxidermy LLC http://www.stehlingstaxidermy.com
Taxidermy Insider / Learn Taxidermy Online http://www.taxidermyinsider.com
920.650.5457 a.n.stehling@gmail.com
November 19, 2013
Offline
THANK YOU VERY MUCH!!!!!!
TOMMY
April 22, 2016
Offline
I use to use that stuff,was a pain and expensive. I came across a product called pour on, not sure if 2 or 1 word. ace has it. a 2 part epoxy clear coat. very shiny.can be brushed on,cheap,goes a long way. Just saying
1 Guest(s)
